Series 1313
1313TC
1313TF
1313EC
1313EF
1313EFR VDC
1313EFR VDC/VAC
1313DFR Standard
1313DFR Miniature
HV1313TC
AC1313TF
Series RC1313
Series 1206
Series 1213
Series 1306
Series 1613
Series 1906
Snubbers
Catalog
Catalog Nomenclature
Specification Summary
Dielectric Properties
Search
About EFC
Factory Tour
Contact Us
Representatives
Distributors
Home
Electronic Film Capacitors, Inc. d/b/a EFC/Wesco

Metallized Polyester Capacitors

SP1313TF
Oval Wrap and Fill

Diagram | Dimensions and Ratings Table
SP1313TF PDF Download

 

EFC Series SP1313TF capacitors are designed specifically for Switching Power Supply applications, where current and low E.S.R. values are important. Capacitance drift over time due to humidity, temperature cycling, or operation life, is negligible. Electrical characteristics, such as insulation resistance (I.R.), dissipation factor, and dielectric absorption, are superior in this Metallized Polyester capacitor as compared to the characteristics displayed by Electrolytic Capacitors. In switching power supply applications requiring medium current, the size and weight savings of the Series SP1313TF capacitors coupled with the superior electrical characteristics mentioned above make SP1313TF capacitors the ideal choice in your new or existing switching power supply.

Case: Flame retardant, tape-wrap construction with epoxy end seals.

Capacitance Tolerance: Standard is ± 20%. Also available are ± 10% and ± 5%. The tolerance applies when measured at 1000 ± 20 Hz at 25°C.

Temperature Range: -55°C to +100°C.

Humidity Resistance: Tested as outlined in MIL-STD-202C, method 103B, condition A. After final condition IR, no less than 1/2 minimum values listed in table above. Dielectric strength to withstand test as outlined in par. 3.4. One failure allowed of 18 units tested.
 

Insulation Resistance (Min.) +25°C +85°C
Megohms x Microfarads 30,000 3,000
Need not exceed (Megohms) 50,000 3,000

 

Diagram

SP1313TF Diagram
All dimensions in inches
 

Dimensions and Ratings

SP1313TF-3     250 VDC
Cap. T W L LEAD
GAUGE
IRMS IPEAK 100 kHz
ESR (Max.)
mF   AWG Amps Amps mW
1.0
1.5
2.2
3.3
4.7
.360
.450
.500
.550
.620
.560
.650
.800
.840
1.010
1.125
1.125
1.125
1.250
1.250
20
20
20
20
18
2.0
2.0
3.0
4.0
4.0
07.0
11.0
16.0
19.0
26.0
41
34
28
23
19

 

SP1313TF-3     400 VDC
Cap. T W L LEAD
GAUGE
IRMS IPEAK 100 kHz
ESR (Max.)
mF   AWG Amps Amps mW
1.0
1.5
2.2
3.3
4.7
.550
.690
.630
.790
.960
.850
.990
1.020
1.180
1.360
1.200
1.200
1.560
1.560
1.560
20
18
18
18
18
2.0
3.0
4.0
4.0
4.0
10.0
14.0
16.0
23.0
33.0
41
34
28
23
19

EFC will manufacture to any non-standard value and size. Please consult factory for special requirements.

Series 1313 Application Options: HV1313TC | AC1313TF

Series 1313 Packaging Options: 1313TC | 1313TF | 1313EC | 1313EF | 1313EFR VDC | 1313EFR VDC/VAC
1313DFR | 1313DFR Mini 

Series 1206 | Series 1213 | Series 1306 | Series 1313 | Series 1613 | Series 1906 | Snubber-Power Capacitors

Catalog | Catalog Nomenclature | Specification Summary | Dielectric Properties

Search

About EFC | Factory Tour | Contact Us | Representatives & Distributors | Home

Electronic Film Capacitors, Inc. d/b/a EFC/Wesco
Electronic Film Capacitors, Inc. d/b/a EFC/Wesco
Reidville Industrial Park
41 Interstate Lane
Waterbury, CT 06705
Telephone: (203) 755-5629
Fax: (203) 755-0659
Email: efc@filmcapacitors.com
Copyright © 1998, 1999, 2000, 2007, 2008
Electronic Film Capacitors, Inc. d/b/a EFC/Wesco