Metallized Polypropylene Capacitors

Series 1213


Specifications | Typical Temperature Curves | Series 1213 Catalog Nomenclature
Series 1213 PDF Download


 
EFC Series 1213 are metallized polypropylene capacitors. This series offers the advantage of superior stability, self healing, high insulation resistance, low dissipation factor and high frequency operation. Suggested applications include: timing circuits, switch mode power supplies (SMPS). Packaging options include: wrap and fill (TC, TF), axial lead box (EC, EF), radial lead box (EFR (VDC), EFR (VDC/VAC)), and radial lead dipped (DFR). Application options include: switching power supply (SP).
 

Specifications

 

    • Capacitance
      Capacitors £1.0 MFD shall be measured at 1 kHz ± 20 Hz. Capacitors >1.0 MFD shall be measured at 60 Hz. Measurements shall be taken at 25°C.
    • Dielectric Strength
      At 25°C, 150% of rated voltage when applied terminal to terminal for one minute through a current limiting resistance.
    • Insulation Resistance
      At 25°C after 2 minutes charge time at rated voltage or 500 VDC, whichever is less, the minimum IR shall be 80,000 Megohm-Microfarads, but need not exceed 120,000 Megohms.
    • Humidity Resistance
      Series 1213 shall meet the requirements of MIL-STD. 202C, Method 103B.
    • Dissipation Factor
      Shall be 0.1% max. when measured as in Par. 2.
    • Life Test
      Will withstand the application of 150% rated voltage at +85°C for 250 hours with not more than one failure in 12 permitted.

Typical Temperature Curves

Metallized Polypropylene

Series 1213 Catalog Nomenclature

* 1213 EFR -03 -0.001 -01 -05

Available Application Options
None
Dielectric Code
1213 - Metallized Polypropylene
Case Code
TC - Wrap & Fill - Round - Axial
TF - Wrap & Fill - Flat - Axial
EC - Epoxy Case - Round - Axial
EF - Epoxy Case - Flat - Axial
EFR - Epoxy Case - Flat - Radial
DFR - Epoxy Dipped - Radial
Size Code
3 - Standard
2 - Miniature
1 - Subminiature
X - Non-Standard
For EC cases use the two-letter diameter/length size code
For metric cases use the one-letter case size code
Capacitance (mF)
See Dimensions and Ratings Tables
Voltage
0.00 - 0050 VDC
.630 - 0063 VDC
1.00 - 0100 VDC
1.50 - 0150 VDC
1.60 - 0160 VDC
2.00 - 0200 VDC
2.50 - 0250 VDC
4.00 - 0400 VDC
6.00 - 0600 VDC
6.30 - 0630 VDC
Tolerance
1 - ± 1%
2 - ± 2%
5 - ± 5%
etc.


EFC will manufacture to any non-standard value and size. Please consult factory for special requirements.