Metallized Polyester Capacitors

Series 1313

Specifications | Typical Temperature Curves | Series 1313 Catalog Nomenclature
Series 1313 PDF Download
 
EFC Series 1313 are metallized polyester capacitors. This series offers the advantage of small size, self healing and low cost. Suggested applications include: medical electronics, telecommunications and high voltage power supplies. Packaging options include: wrap and fill (TC, TF), axial lead box (EC, EF), radial lead box (EFR (VDC), EFR (VDC/VAC)), and radial lead dipped (DFR (Standard), DFR (Miniature)). Application options include: high voltage (HV), "AC" across the line (AC), switching power supply (SP), and noise suppression (RC).
 

Specifications

 

    •  
        • Temperature Range
          -55°C to +85°C at rated voltage. To 105°C with 25% voltage derating.
        • Capacitance
          Capacitors £1.0 MFD shall be measured at 1 kHz ± 20 Hz. Capacitors >1.0 MFD shall be measured at 60 Hz. Measurements shall be taken at 25°C.
        • Dielectric Strength
          At 25°C, 200% of rated voltage when applied terminal to terminal for one minute through a current limiting resistance.
        • Insulation Resistance
          At 25°C after 2 minutes charge time at rated voltage or 500 VDC, whichever is less, the minimum IR shall be 200,000 Megohm-Microfarads, but need not exceed 250,000 Megohms.
        • Humidity Resistance
          Series 1206 shall meet the requirements of MIL-STD. 202C, Method 103B.
        • Dissipation Factor
          Shall be 0.07% max. when measured as in Par. 2.
        • Life Test
          Will withstand the application of 140% rated voltage at +85°C for 250 hours with not more than one failure in 12 permitted.

Typical Temperature Curves

Metallized Polyester

Series 1313 Catalog Nomenclature

* 1313 EFR -03 -0.001 -01 -05

Available Application Options
AC - Small size with AC-current rating, designed for general purpose use at 60 Hz
HV - High voltage ratings to 15,000 VDC, designed for use in high voltage power supplies, rectifiers, and other similar circuits
SP - Low ESR and high current rating, designed for Switch Mode Power Supply
Dielectric Code
1313 - Metallized Polyester
Case Code
TC - Wrap & Fill - Round - Axial
TF - Wrap & Fill - Flat - Axial
EC - Epoxy Case - Round - Axial
EF - Epoxy Case - Flat - Axial
EFR - Epoxy Case - Flat - Radial
DFR - Epoxy Dipped - Radial
Size Code
3 - Standard
2 - Miniature
1 - Subminiature
X - Non-Standard
For EC cases use the two-letter diameter/length size code
For metric cases use the one-letter case size code
Capacitance (mF)
See Dimensions and Ratings Tables
Voltage
00.00 - 00050 VDC
0.630 - 00063 VDC
01.00 - 00100 VDC
01.50 - 00150 VDC
01.60 - 00160 VDC
02.00 - 00200 VDC
02.50 - 00250 VDC
04.00 - 00400 VDC
06.00 - 00600 VDC
06.30 - 00630 VDC
10.00 - 01000 VDC
2.0K0 - 02000 VDC
3.0K0 - 03000 VDC
etc.
Tolerance
1 - ± 1%
2 - ± 2%
5 - ± 5%
etc.

EFC will manufacture to any non-standard value and size. Please consult factory for special requirements.