Metallized Polycarbonate Capacitors

Series 1613


 Specifications | Typical Temperature Curves | Series 1613 Catalog Nomenclature
Series 1613 PDF Download
 
EFC Series 1613 are metallized polycarbonate capacitors. This series offers the advantage of miniature size, superior stability, self healing, high insulation resistance, low dissipation factor and high frequency operation. Suggested applications include: timing circuits, filters, high current applications. Packaging options include: wrap and fill (TC, TF), axial lead box (EC, EF), radial lead box (EFR (VDC), EFR (VDC/VAC)), and radial lead dipped (DFR).
 

 

Specifications

 

    • Temperature Range
      -55°C to +125°C at rated voltage.
    • Capacitance
      Capacitors £1.0 MFD shall be measured at 1 kHz ± 20 Hz. Capacitors >1.0 MFD shall be measured at 120 Hz. Measurements shall be taken at 25°C.
    • Dielectric Strength
      At 25°C, 150% of rated voltage when applied terminal to terminal for one minute through a current limiting resistance.
    • Insulation Resistance
      At 25°C after 2 minutes charge time at rated voltage or 500 VDC, whichever is less, the minimum IR shall be: 50,000 Megohm-Microfarads, but need not exceed 100,000 Megohms, for voltages greater than 75 VDC; and 15,000 Megohm-Microfarads, but need not exceed 50,000 Megohms, for voltages 75 VDC or less.
    • Humidity Resistance
      Series 1613 shall meet the requirements of MIL-STD. 202C, Method 103B.
    • Dissipation Factor
      Shall be 0.3% max. when measured as in Par. 2.
    • Life Test
      Will withstand the application of 140% rated voltage at +125°C for 250 hours with not more than one failure in 12 permitted.

Typical Temperature Curves

 

Metallized Polycarbonate

 


Series 1613 Catalog Nomenclature

* 1613 EFR -03 -0.001 -01 -05

Available Application Options
None
Dielectric Code
1613 - Metallized Polycarbonate
Case Code
TC - Wrap & Fill - Round - Axial
TF - Wrap & Fill - Flat - Axial
EC - Epoxy Case - Round - Axial
EF - Epoxy Case - Flat - Axial
EFR - Epoxy Case - Flat - Radial
DFR - Epoxy Dipped - Radial
Size Code
3 - Standard
2 - Miniature
1 - Subminiature
X - Non-Standard
For EC cases use the two-letter diameter/length size code
For metric cases use the one-letter case size code
Capacitance (mF)
See Dimensions and Ratings Tables
Voltage
0.00 - 0050 VDC
.630 - 0063 VDC
.750 - 0075 VDC
1.00 - 0100 VDC
1.50 - 0150 VDC
1.60 - 0160 VDC
2.00 - 0200 VDC
2.50 - 0250 VDC
4.00 - 0400 VDC
6.00 - 0600 VDC
6.30 - 0630 VDC
Tolerance
1 - ± 1%
2 - ± 2%
5 - ± 5%
etc.

EFC will manufacture to any non-standard value and size. Please consult factory for special requirements.